2.4 inch TFT touch Screen LCD Arduino Shield




จอ TFT LCD ขนาด 2.4″ พร้อมช่องเสียบ SD Card 

  • 2.4 inch TFT touch Screen LCD Module For Arduino. The LCD has excellent vivid color contrast.

    Spice up your Arduino project with a beautiful large touchscreen display shield with built in microSD card connection. This TFT display is big (2.4″ diagonal) bright (4 white-LED backlight) and colorful (18-bit 262,000 different shades)! 240×320 pixels with individual pixel control. It has way more resolution than a black and white 128×64 display. As a bonus, this display has a resistive touchscreen attached to it already, so you can detect finger presses anywhere on the screen.

    Technical Specifications

    • 2.4″ diagonal LCD TFT display
    • 240×320 resolution, 18-bit (262,000) color
    • SPFD5408 controller with built in video RAM buffer
    • 8 bit digital interface, plus 4 control lines
    • Uses digital pins 5-13 and analog 0-3. That means you can use digital pins 2, 3 and analog 4 and 5. Pin 12 is available if not using the microSD
    • Works with any Arduino ‘328 or Mega (Leonardo not supported yet)
    • 5V compatible! Use with 3.3V or 5V logic
    • Onboard 3.3V 300mA LDO regulator
    • 4 white LED backlight. On by default but you can connect the transistor to a digital pin for backlight control
    • 4-wire resistive touchscreen

    Documents & Downloads

    1. SPFD5408 LCD Controller Datasheet

    2. Schematics

    3. Adafruit 2.8″ Touch Screen LCD uses same graphic controller. Please see this link.

    Arduino Libraries:

    Following Libraries alongwith an example (graphictest) found in TFTLCD-Library-Master was tested with this 2.4″ TFT display.

    Notes: Please extract these folders under Arduino Library folder and do not forget to replace “-” (dash) with “_” (underscore)

    Tested Example  :graphictest (Tested on Arduino UNO R3)




มาเป็นคนแรกที่วิจารณ์ “2.4 inch TFT touch Screen LCD Arduino Shield”

อีเมลของคุณจะไม่แสดงให้คนอื่นเห็น ช่องข้อมูลจำเป็นถูกทำเครื่องหมาย *